Woodworking is not just a skill but also a very beautiful art. There are many people who learn this art as their hobby because spending a little bit of time with wood and tools is something that people love to do. You can also check out the best Woodworking Plan, Reviewed by professionals of this field. Here are a few tips that you can use in your beginning days of woodworking:
Half Pencil for marking – A pro tip which you can only get by professionals is that you should always use half pencil to draw marks. You can cut a pencil into half and grind it on a belt sander. The flat edge of the pencil will help in marking the perfect outline as the edge will act as support and mark an exact template. These are very helpful for marking curvy templates as you just have to run along the edges of the piece which you are using a template.
Straight lines on cylindrical bars – You know how tricky and frustrating it is to draw straight lines on cylindrical bars like a dowel. You can make this rough task into an absolutely easy one with the help of this tip as used by professionals. You need to place the dowel into a straight slot and then draw the line by sliding your pencil from the upper edge of the slot. Thus, it will be very easier to draw straight lines on any size of cylindrical bars.
Flexible Sanding Block – Many times, you face the problem when you have to sand any curvy surface, especially if the curves are in the shape of a crater or a lot of round rings. You can use a flexible small notebook and wrap the sanding paper around it. Now, you can bend it, fold it and make it a round or curvy sanding tool. It will make it easier for you to sand all kinds of surfaces, reach the spots where it is usually difficult to reach and also you can hold it with ease.
Hot glue Clamps – It is difficult to grind, sand or make cuts on small pieces of wood because they don’t easily get clamped on your table. If you are not skilled then you can also get injured because it takes a lot of practice to work on small pieces with sharp tools. If you are beginner then you try this trick which is also used by many experts i.e. use hot glue as your clamp. Fix your wooden piece on a pedestal stick with hot glue and then you can finish that piece very easily. When you are done with your project then you can easily take it out with the help of a sharp knife.
Depth of drilled hole – When you are drilling a hole and you have to drill it to a specific length. Most of the time, you end up drilling a bigger hole. So, make sure that next time when you have to drill a hole up to a specific length then simply put a colored tape at the same length on the drill, so that you can stop the machine at the exact point.